Dive Into the New Age of Fiber Optic Networking Products

Fiber Optic Splice Closures

FireFly-D2000LX-TD Dome Closure

The WPT FireFly-D2000LX-TD is molded from high-impact-resistant plastic which is also U.V. resistant and immune to temperature extremes. The closure is highly versatile, with a range of cable entry and exit port diameters and configurations to accommodate all FTTx environments. Up to 144 fiber optic splices may be housed and protected by FireFly dome. The six-hinged low profile splice trays may be folded down to expose each splice tray individually during splicing or when re-entering the closure for maintenance. Adhering to the IP68 standard, the FireFly closure is completely dust-tight and can be immersed in water continuously under specific conditions without any negative impact on its functionality or performance.

FireFly-D2000L-HS Dome Closure

The WPT FireFly-D2000L-HS is molded from high-impact-resistant plastic which is also U.V. resistant and immune to temperature extremes. The closure is highly versatile, with a range of cable entry and exit port diameters and configurations to accommodate all FTTx environments. All entry and exit ports are secured by using heat shrink sleeves. Up to 144 fiber optic splices may be housed and protected by FireFly dome. The six-hinged low profile splice trays may be folded down to expose each splice tray individually during splicing or when re-entering the closure for maintenance. Adhering to the IP68 standard, the FireFly closure is completely dust-tight and can be immersed in water continuously under specific conditions without any negative impact on its functionality or performance.

FireFly-D2000-M Dome Closure

The WPT FireFly-D2000-M is extremely compact and an excellent choice for confined applications where space is at a premium. Molded from high-impact-resistant plastic which is also U.V. resistant and immune to temperature extremes, the closure allows the entry/exit of two main cables in addition to four drop cable ports. All entry and exit ports (total of six) are secured by silicone grommets which provide excellent sheath retention and pull-out strength. Up to 72 fiber optic splices may be housed and protected by FireFly dome closure. The three-hinged low profile splice trays may be folded down to expose each splice tray individually during splicing or when re-entering the closure for maintenance. Adhering to the IP68 standard, the FireFly-D2000-M dome closure is completely dust-tight and can be immersed in water continuously under specific conditions without any negative impact on its functionality or performance.

FireFly -DD-CL Distribution Dome Closure

The FireFly-DD-CL Distribution Dome Closure is ideal for Plug & Play fiber optic network installations. It is an air and water-tight closure that meets IP68 specifications. Each unit includes one entry port for a fiber optic cable up to 14mm in diameter and 8 distribution ports for drop cables fed by balanced or unbalanced splitters. Suitable for wall, pole, or ADSS messenger cable installations, each unit is in accordance with Telcordia GR-771 and Telcordia GR-1209. With a compact and space-saving design, the FireFly-DD-CL Distribution Closure ensures efficient use of valuable real estate, making it an ideal choice for compact urban installations. Built to withstand the elements, the closure features a durable, weather and rodent-resistant design, providing long-lasting performance in any climate or terrain. Designed with ease of installation in mind, the Distribution Closure significantly reduces setup time and costs. Get your network up and running quickly without compromising on quality. Whether you’re setting up a small network or expanding an enterprise-level infrastructure or building a fiber optic network backbone, our closures offer scalability to accommodate your needs as your network grows.

FDSC Fiber Distribution Splice Closure

The FDSC Fiber Distribution Splice Closure is used to terminate 1 to 8 drops while allowing the main F.O. cable to pass through the housing. It is an air and water-tight closure that meets IP68 specifications. Each unit includes one main entry and exit port for a fiber optic cables 8mm (round cable) and 4.3 x 7.8mm (flat cable) diameters and 8 distribution ports for drop cables from 3 to 8mm round drops or 4.3 x 7.8 mm flat drops. Suitable for wall and pole mounting as well as direct buried, manhole or pedestal applications, each unit is in accordance with Telcordia GR-771 and Telcordia GR-1209. With a compact and space-saving design the FDSC Closure makes it an ideal choice for compact urban installations. Built to withstand the elements, the closure features a durable, weather and rodent-resistant design, providing long-lasting performance in any climate or terrain. Designed with ease of installation in mind, the FDSC Closure significantly reduces setup time and costs. Get your network up and running quickly without compromising on quality. Whether you’re setting up a small network or expanding an enterprise-level infrastructure or building a fiber optic network backbone, our closures offer scalability to accommodate your needs as your network grows.

FireFly-SNAP Fiber Optic Closure (300 Series)

The WPT FireFly-SNAP (Series 300) Closure is molded from high-impact-resistant plastic which is also U.V. resistant and immune to temperature extremes. The closure is highly versatile, with 4 cable entry and exit ports to accommodate cable diameters ranging from 6mm to 19mm. Industry standard “B” sealing tape is used to ensure a positive seal in all environments. Up to 96 fiber optic fusion or mechanical splices may be housed and protected by our FireFly-SNAP closure. Underneath the low-profile splice trays is a sufficient amount of room to store 2.5 to 3 meters of buffer tubes. Adhering to the IP68 standard, the FireFly-SNAP closure is completely dust-tight and can be immersed in water continuously under specific conditions without any negative impact on its functionality or performance.

FireFly-SNAP Fiber Optic Closure (350 Series)

The WPT FireFly-SNAP Closure is molded from high-impact-resistant plastic which is also U.V. resistant and immune to temperature extremes. The closure is highly versatile, with a range of 4 cable entry and exit cable ports and configurations to accommodate all FTTx environments. Multipoint grommets are also available for added functionality. All entry and exit ports are secured by using silicone gaskets that will accommodate cable diameters from 6mm to 19mm. Up to 96 fiber optic fusion or mechanical splices may be housed and protected by our FireFly-SNAP closure. Underneath the low-profile splice trays is a sufficient amount of room to store 2.5 to 3 meters of buffer tubes. Adhering to the IP68 standard, the FireFly-SNAP closure is completely dust-tight and can be immersed in water continuously under specific conditions without any negative impact on its functionality or performance.

Tomahawk Fiber Optic Closure

Unleash the speed of light and invest in a closure that stands the test of time. Crafted with premium materials and expert engineering, the Tomahawk Fiber Optic Closure is a reliable companion for the long haul.

Designed to protect up to 6 optical fiber splices in a FTTx environment, the Tomahawk can be used as a stand alone closure or for repairs in aerial or intermediate networks. Entry and exit ports can accept flexible flat or round cables from 5mm to 8mm in diameter. Designed with longevity in mind the Tomahawk Mini is resistant to all environmental conditions, including moisture, UV light, water ingress and rodent attack. Each unit is supplied with an internal mechanical sheath retention system capable of securing cables inside the closure and protecting them from damage and pull-out.

Our Fiber Optic Closure is designed for easy installation. Install it and forget it – it’s that simple. Spend less time worrying about your OSP network and more time employing top-notch connectivity. The future is now, and it’s fiber-powered. Get our Fiber Optic Closure and revolutionize the way you connect. Your blazing-fast network awaits.

Tomahawk II Fiber Optic Closure

Unleash the speed of light and invest in a closure that stands the test of time. Crafted with premium materials and expert engineering, the Tomahawk II Fiber Optic Closure is a reliable companion for the long haul. Designed to protect up to 6 SC connectors in a FTTx environment, the Tomahawk II can be used as a stand alone closure or for repairs in aerial or intermediate networks. Four entry and exit ports can accept flexible flat or round cables from 5mm to 8mm in diameter. Designed with longevity in mind the Tomahawk II is resistant to all environmental conditions, including moisture, UV light, water ingress and rodent attack. Each unit is supplied with an internal mechanical sheath retention system capable of securing cables inside the closure and protecting them from damage and pull-out. Our Fiber Optic Closure is designed for easy installation. Install it and forget it – it’s that simple. Spend less time worrying about your OSP network and more time employing top-notch connectivity. The future is now, and it’s fiber-powered. Get our Fiber Optic Closure and revolutionize the way you connect. Your blazing-fast network awaits.

Patriot Closure

Big fiber ideas come in small packages. The Patriot fiber drop cable splice closure is small yet very effective in sealing and protecting single fiber drop cables. Molded from high-impact-resistant plastic, the Patriot is used for repairing or splicing two fiber ends. It may also be used to join two pre-terminated drops with SC/APC or SC/UPC connectors in most all environmental conditions. The small, low-profile design seamlessly integrates with your existing network infrastructure, minimizing downtime and maximizing efficiency. The Patriot is easy to assemble without special tools. Adhering to the IP68 standard, the Patriot is completely dust-tight and can be immersed in water continuously under specific conditions without any negative impact on its functionality or performance.