Flush Mount RJ-11 Wall Jack

One or two RJ-11 modules (two or four contacts per module) flush mounted for use in all wall mount applications.

Features

Insulation Displacement (IDC) Type Connections

• "Snap-down" IDC connectors ensure positive metal-to-metal contact.

• No wire stripping required.

• Will accept 0.4 - 0.63mm (26-22 gauge) conductors.

Gel Encapsulated Metal Contacts.

• Totally encapsulated wire connection points provide complete protection from all environmental conditions.

Clear Plastic Housing

• Visually inspect the integrity of all wire connections.

Rugged Design and Construction

• Compact, visually appealing design.

• Built-in cable strain relief.

High Quality RJ-11 Jacks.

• 50 micron gold plated contacts.

• 100 gram contact force.

• May be ordered dry or gel-filled for maximum protection against all environmental conditions.

Applications

• Designed for mounting on walls.
• Excellent for high humidity or extremely adverse environmental conditions.


SPECIFICATIONS-ORDERING
LITERATURE REQUEST
LITERATURE IN PDF FORMAT
PRINT THIS PAGE
SITE MAP
CONTACT WPT
WPT HOME

The WPT Flush Mount RJ-11 Wall Jack includes either one or two RJ-11 connector modules each of which may be configured with two or four contacts. The RJ-11 connector modules may be either dry or gel-filled to prevent the entry of corrosive contaminants in harsh environments.
If only one connector module is used, the other position is filled with a blank that may be easily removed and replaced with the second connector module.